WARNING Make sure the Byrna launcher is in the SAFE mode before installing a magazine.
INSTALLING THE MAGAZINE:
1. Make sure the breech indicator is down and the breech is empty. (You don't want a projectile still in the chamber folks!)
2. Align the top of the magazine with the magazine well, make sure the CO2 cap tool is facing the rear of the launcher.
3. Firmly insert the magazine into the magazine well of the launcher, pushing upward until you hear a click and the magazine locks in place.
Note: Do not install a full magazine when a projectile remains in the barrel, as this will cause your launcher to jam.
Comments